Automobile Division
HOBBING, SHAPING, SHAVING LINE
-
As the main processing line, it has a line systematic arrangement of HOBBING M/C, SHAPING M/C, and SHAVING M/C. it can have a maximum of Φ360 × ℓ700 for external processing and up to Φ400 × ℓ120 for internal processing. It also maximizes work efficiency by arranging B, R M/C.
-
HOBBING LINE
HOBBING LINE enables processing of single gear of reducers for gearbox and heavy equipment, HELICAL and SPUR GEAR of SHAFT type, and SPLINE processing of SHAFT types.
Has GB-40CNC, JD-350, THO-250, etc.
-
SHAPING LINE
SHAPING LINE enables the SPLINE processing and internal gear processing for the CLUTCH part of gearbox and other GEAR types.
Has PSA-400, SA-25CNC, TSH-250, etc.
-
SHAVING LINE
SHAVING LINE enables the processing of HELICAL and SPUR GEAR shaving for all kinds of GEAR and SHAFT types.
Has SV-300, ZSA-320, GSF-400, TSA-320, etc.
TOOTH GRIND PROCESSING LINE
-
As equipment for tooth surface processing after heat treatment, tooth grinding equipment has V-TYPE (P-400G) and H-TYPE (RI-370) for CNC GRAINAING M/C, can enable grade 3 of DIN for GEAR tooth as well as specifications of M12 × Φ400 × 200ℓ.
COUNT SHAFT AUTOMATION LINE
-
COUNT SHAFT AUTOMATION LINE is the latest line facility that can automate and manufactures the products of multi-phase GEAR (6 gear processes) of COUNTER SHAFTS for small and medium-sized trucks. / Equipment composition / Main production items
-
CNC HOBBING M/C
-
CNC SHAPING M/C
-
CNC SHAVING M/C
Equipment Composition
-
CNC HOBBING M/C
-
CNC SHAPING M/C
-
CNC SHAVING M/C
-
CNC DEBURRING M/C
-
MARKING M/C
Main Production Items
-
COUNTER SHAFT for SUV, TRUCK
OTHER FACILITY LINE
-
BROACH LINE
BROACHING M/C is 20-ton equipment that can simply and accurately process (to reduce cost) the internal tooth of products by tools. It varies by specifications, but enables up to MAX Φ130 × 50ℓ.
-
BEAM WELDER LINE
Unlike general welding, ELECTRONIC BEAM WELDING M/C is welding equipment that dissolves tools based on electronic beam and has no changes, enabling welding in the finishing phase of products.
It is applied to products responding to beam welding by changing the processing method due to cost problem, and enable up to Φ130 × 300ℓ of welding diameter (but may vary based on product shape).
-
STABBING SORTER LINE
STABBING SORTER ROTATES the MASTER GEAR and mass-produced GEAR in mesh and selects the fine defects of ㎛ unit such as the OBD (OPD), RUN-OUT of GEAR and stabbing on the tooth surface. It is a facility that automatically marks the area of problem and easily find defected area to modify it and treat defect.
-
GRINDING LINE
The grinding process is a process of satisfying the surface roughness of gears and shafts, which are our company’s main products. It is generally the finishing process of manufacturing gears and shafts. This is a process where you achieve the required dimension and surface roughness by grinding shafts’ external diameters and sides as well as gears’ internal diameters and flat surfaces when they have been hardened after heat treatment.
